Neptune Apex Aquariumcomputers
The most successful aquariums are the aquariums with an owner who understands most of what's going on in their little world-in-a-glass box. The real key to enjoying this hobby is to do it without turning it into a full-time job! Owning an Apex aquarium controller is the best way to ensure that you can focus on things you love again, such as fish and coral, without having to worry about temperature problems, pH levels, light timers, dosing tanks , vacation plans, etc. And if you wish, you can take it to the next level with: remote monitoring and control of your tank, iPhone / iPad / Android apps, advanced LED dimmers, wireless VorTech pump control, automatic top-up, calcium reaction control , ozone control, automatic dosing of elements, automatic feeding of your fish and much more!
Neptune Systems Apex A3 Junior System
The A3 Jr is a Monitoring Only solution. You can't enable or disable anything with it. However, it becomes a full-fledged controller once you add a Powerbar. To make it a compl...
In stockNeptune Systems A3 Apex
The A3 Apex System provides control but scaled back monitoring with room to grow for the everyday aquarist. This kit offers you more options than the Apex Jr. ...
Delivery time 2+ weeksNeptune Systems A3 Apex PRO
Monitors critical parameters (temperature and pH) Makes it easy to track changes in your tank via any device Alerts you to changes Easy to install...
Delivery time 1-2 weeksNeptune Systems Energy Bar 632
When we decided to create an Energy Bar for this new Apex, it was designed from scratch. The Energy Bar 632 not only has six 220V AC outputs, but also includes an internal 100W 24V...
Delivery time 2+ weeksWAV Starterkit
2 WAV flow pumps, a 1LINK module and a power adapter. Suitable for Neptune Systems APEX Aquacontroller.
In stockDOS dosing system
Dosing unit with 2 channels for very precise dosing from 0.1 ml!
Out of productionPAR Monitoring Kit
Monitor the light intensity of your aquarium with this PAR meter, including 'Real Reef Rock'
In stockSingle WAV Pump
Single WAV pump, suitable as an extension to a WAV starter kit or to be connected to a single 1LINK module.
Delivery time 2+ weeksDOS Dual Reservoir
Double reservoir with large capacity (2 x 2 liters) including sensors for the detection of touched liquids.
Delivery time 2+ weeksSingle DOS Head
Spare DOS head to replace defective or worn head. Lifespan approximately 700 pumping hours.
In stockAutomatic Feed System - AFS
Feeding system for your APEX computer. Determine how much and how often your fish is fed. Suitable for dry food ....
In stockVariable Speed Pump Control - VDM
With this module you can connect and operate any flow pump with a 0-10V connection with your APEX computer ....
Delivery time 2+ weeksph/ORP/Redox Elektrode Module - PM1
Module to which a pH electrode and ORP / Redox electrode can be connected. An I / O breakout box also fits ....
In stockNeptune Systems GRO Macroalgae Light
A low nutrient content is the key to a healthy and algae-free saltwater aquarium. The most successful reef aquariums use a macroalgae-filled growing space with a view to now...
In stockSalinity Module - PM2
Module to which a salinity / conductivity / salt meter electrode can be connected. An I / O breakout box and a temperature electrode can also be connected to this ....
Delivery time 2+ weeksAdvanced Leak Detection - ALD
Module to which a maximum of 4 leakage sensors (P1 and P2) can be connected ....
Delivery time 2+ weeksLunar Simulator Module - NGO
Module to which the LSM LED string ((LSM3 and LSM5) can be connected ....
Delivery time 2+ weeksAdvanced Leak Detection Sensor - ALD-P1
Flat leakage sensor to be used together with the ALD module ....
SaleAdvanced Leak Detection Sensor - ALD-P2
Thick Leakage sensor to be used together with the ALD module ....
In stockMagnetic elektrodehouder
This electrode holder has a strong magnet and is made of durable plastic. Suitable for a maximum of 4 electrodes ....
In stockI/O Breakout Box
Breakout box with 6 channels suitable for floats, switches, leakage sensors, push buttons and more ....
In stockConductivity Elektrode - Lab Grade
Conductivity electrode for measuring the salinity in the water ....
Delivery time 2+ weeksTemperature sensor
Temperature sensor to be connected to your APEX computer, a PM1 module or to be used with the PM2 and PM3 for temperature compensation ....
Delivery time 2+ weeksAquabus kabel M/M 457 cm
Long Aquabus cable of 4.5 meters long. You use this to link modules together ....
Delivery time 2+ weeksAquabus extension cable M / F 457 cm
Long Aquabus extension cable of 4.5 meters long. You use this to extend an existing cable ....
In stock2 channel Tunze Stream cable
You use this cable to connect certain Tunze flow pumps to your APEX computer ....
In stock2 channel Light Dimming cable
Cable to connect 0-10V dimmable LED lighting to a VDM module ....
In stockAdvanced LED Dimming cable for VDM
Cable to connect AI Sol and supported Acan LED lighting to a VDM module ....
In stockAquabus kabel M/M 183 cm
Long Aquabus cable of 1.8 meters long. You use this to link modules together ....
In stockAquabus kabel M/M 92 cm
Aquabus cable of 0.9 meters long. You use this to link modules together ....
In stockDosing hose for DOS
Extra hose for DOS dosing system. 4mm inner diameter and 6mm outer diameter ....
In stock4.00 pH kalibratievloeistof
4.00 pH calibration fluid for pH electrodes from Neptune Systems ....
In stock7.00 pH kalibratievloeistof
7.00 pH calibration fluid for pH electrodes from Neptune Systems ....
In stockConductivity 447 calibration fluid
Calibration fluid for conductivity electrode. For use with the PM2 and osmosis water ....
In stockConductivity 53mS kalibratievloeistof
Calibration fluid for conductivity electrode. For use with the PM2 and seawater ....
In stock10.00 pH kalibratievloeistof
10.00 pH calibration fluid for pH electrodes from Neptune Systems ...
In stockDissolved Oxygen Module - PM3
You connect the 'Dissolved Oxygen' electrode to this module ....
Delivery time 1-2 weeksDissolved Oxygen electrode
Measure the amount of dissolved oxygen in your aquarium water. To be used together with the PM3 Module ....
Delivery time 1-2 weeksDC24 Male-only cable 3 meters
DC24 cable with loose ends to connect the device as desired ....
In stockAquabus kabel M/M 30 cm
Aquabus cable of 30 centimeters long. You use this to link modules together ....
In stockAquabus kabel M/M 900 cm
Long 9-meter long Aquabus cable. You use this to link modules together ....
In stockAquabus extension cable M / F 900 cm
Long 9-meter long Aquabus extension cable. You use this to extend an existing cable ....
In stockDOS + DDR Combo Package
Economical set with a DOS dosing unit and a Dual Dos Reservoir ...
Delivery time 2+ weeksORP / REDOX Elektrode - Double Junction
Extra durable and accurate Redox electrode ....
Delivery time 2+ weeksDissolved Oxygen Membraan Kit
Service set to replace the membrane of your oxygen electrode ....
Delivery time 1-2 weeksFlow Monitoring Kit
This kit contains the FMM, 1x FS-100 and 2x FS-50 - PVC Material not included ...
In stockFluid Monitoring Module
You can connect up to 4 optical, flow and leakage sensors to the FMM module ....
In stockFlow Sensor 1"
Flow sensor 1 "- suitable for pipe diameters of 25mm and 32mm ...
Delivery time 2+ weeksOptical Sensor with magnetic support
Optical water sensor suitable for FMM - with magnet ...
In stockSolenoid valve
Solenoid valve suitable for 4 mm hoses. Can be connected to accessory port. Pay attention! PS-24 power adapter is not included ....
Delivery time 2+ weeksDC24 Male-Female cable - 3 meters
Extension cable suitable for PMUP Utility pump and the SV-1 solenoid valve ...
In stockLeak Detection Probe LD-2
Thick leakage sensor to be used together with the FMM module ....
In stockPower adapter - 24V - EU / UK plug
Power adapter suitable for the PMUP pump and the SV-1 solenoid valve ....
Delivery time 2+ weeksAdvanced Sensor Module - ASM
Separate ASM module to which a PAR meter can be connected ....
Delivery time 2+ weeksCOR 15 Intelligent Pump
COR 15 - This submersible pump (which can also be used externally) now has its own external control cabinet, but you only need to connect it in one place - 1Link. With less than 5 ...
In stockCOR 20 Intelligent Pump
The COR-20 is finally here and this video will tell you all about it. The COR-20 is a DC-powered return pump for aquariums that produces up to 2000 gallons per hour and uses less t...
In stockAutomatic Top-Off Kit v2
Safe and complete kit with optical sensors, pump and magnet assembly for topping up water. ...
Delivery time 2+ weeksDC24 Male-bare 24 v cable 3 meters
DC24 cable with loose ends to connect device as desired ....
In stockNeptune Systems SKY - Reef Aquarium Light
The SKY Reef Aquarium lamp is a 200W LED aquarium lamp, with patented diffuser technology, that smoothly fuses all 104 LEDs into a homogeneous field to create optimized coral light...
In stockUtility pump v2
The PMUP is a 24VDC submersible pump designed to be connected directly to the DC24 accessory ports on the FMM module, 1Link module OR the same ports on the new Energy Bar 832 ....
In stockTrident 2 month reagent kit
Reagent kit for the Neptune Systems Trident. Enough for 2 months ....
Delivery time 2+ weeksTrident - Marine Aquarium Water Analyzer
The Neptune Systems Trident is an automated testing system that regularly tests alkalinity, calcium and magnesium in your saltwater aquarium and then passes this information on to ...
Delivery time 2+ weeksTrident Calibration Solution
Replacement reference standard for Trident calibration. Also included in the reagent kit for every 2 months...
In stockNeptune High water sensor
The Neptune Systems High Water Sensor is a sensor to measure a high water standard. ...
Delivery time 2+ weeksNeptune Low water sensor
The Neptune Systems Low Water Sensor is a sensor to measure a low water standard....
Delivery time 2+ weeksNeptune Osmosis sensor
The Neptune Systems Osmosis Sensor is a sensor to measure the water level....
Delivery time 2+ weeksTrident 6 month reagent kit
6-month reagent kit (based on the standard test schedule of 4x Alk / 2x Ca / 2x Mg per day.) ...
Delivery time 2+ weeksNeptune Systems 1 LINK Power Adapter
The Neptune Systems 1LINK power supply is a spare or replacement 24V 120W power supply that can only be used for the Neptune Systems 1LINK module. The power supply comes with a Eur...
In stockNeptune Calibration Kit
The Neptune Systems Probe Calibration Kit includes everything you need to calibrate your pH probe and salinity probe for reef tank conditions. The single use packages make calib......
In stockNeptune Systems Liquid Level Sensor with Clip Mount - 23-inch
The Neptune LLS is an industry first! While most liquid level sensors simply measure the presence or absence of liquid at a predetermined sensor height, the LLS is one...
In stockNeptune Systems Liquid Level Sensor with Clip Mount - 4-inch
The Neptune LLS is an industry first! While most liquid level sensors simply measure the presence or absence of liquid at a predetermined sensor height, the LLS is one...
In stockNeptune Systems Optical Leak Detection Probe for solid surfaces
Neptune's LD-3 Multi-Surface Optical Leak Sensor is a significant improvement over its analog counterpart, the LD-2 Solid Surface Leak Detection Probe. While the LD-2 uses...
In stockNeptune Systems Optical Sensor with Integrated Magnet
The Neptune MOS replaces the previous OS-1-M and features an updated design that fits into smaller spaces and helps prevent water from entering the sensor. ...
In stockNeptune Systems Liquid Level Sensor with Clip Mount - 15- inch
The Neptune LLS is an industry first! While most liquid level sensors simply measure the presence or absence of liquid at a predetermined sensor height, the LLS is one...
In stockNeptune Systems MXM Mobius Wireless Control Module
Connect EcoTech & AquaIllumination equipment wirelessly to an Apex...
In stockNeptune Systems Trident DIY Service Kit
The DIY Service Kit is a great option for our customers who want to perform the recommended service themselves. This is only for the most practical customers who consider themselve...
Delivery time 2+ weeksNeptune Systems DOS Dosing System - Quiet Drive
Multi-purpose dosing unit with 2 channels for very precise dosing from 0.1 ml! The DOS combines super quality with the simplicity of the Apex Fusion Wizard to set for example: ...
Delivery time 2+ weeksTrident NP - Nitrate and Phosphate Water Analyzer
The Trident NP is the smart way to automate organic level testing in marine ecosystems. The Neptune Systems Trident NP is an advanced device for automated nitrate testing...
In stockTrident NP 2 month reagent kit
Reagent kit for the Neptune Systems Trident NP. Sufficient for 2 months....
In stock