Cuttings & supplies

We sell everything needed for the successful cuttings of corals such as cuttings with a more natural shape, plate cuttings, hand tools (ideal for cuttings of soft corals such as buttons and disc anemones / ears), tweezers, special coral scissors and much more ... If you cannot find what you are looking for, please contact us. In general we can deliver everything.

Glue & kit

Glue and kit for sticking on corals, plants and stones

Secondary adhesives for corals

Secondary adhesives for corals in gel form based on cyanoacrylate. With these adhesives it is possible to glue corals under water very quickly. Also suitable for gluing corals ...

D-D Aquascape Aquarium Epoxy

Aquascape is a 2-component epoxy adhesive that has been specially developed by DD for use in freshwater and saltwater aquariums. For example, it can be used for gluing rocks in the...

ATI Easy Frag 250ml.

A new glue for gluing your corals and cuttings. Allow the desired amount of granules to dissolve in water of at least 60 degrees Celsius ....

Aquaforest Stonefix

Fast-binding cement-based adhesive intended for joining large elements of living stone or ceramic stone. It contains no toxic substances and is therefore 100% safe for fish and inv...

Corafix superfast 240gr.

Fast curing in 2 minutes - also under water

Tunze CORAL FIX 112 gram

2 Component adhesive (malleable) for bonding (cuttings) of hard corals. Content 112 grams

GROTECH KORALLENKLEBER QUICK 115gr.

2 component adhesive for bonding corals. Fast curing - workable for 5 minutes.

Vertex coral glue V-Colla 114gr.

Vertex coral glue V-Colla 114gr. is a purple-colored epoxy for bonding corals to stones ...

Microbe-Lift Reefscaper - reef and coral mortar

Reef Scaper is a specially developed reef and coral glue for the fast and safe processing of outside and inside the water. Reef Scaper the ideal aquarium mortar for bonding reef, r...

AquaForest Fix Glue 110gr.

Special mass of plastic consisting of two components for connecting small rocks and attaching stone corals to the rock. Does not cause any impurity in the water and is not ...

Aquaforest Poly Glue 600gr.

Polymer glue for coral. Use: place the glue pellets in hot water (approximately 60ºC / 140ºF). After a few minutes an easily malleable mass forms that has the best adherent prope...

DvH Fragsation

Fragsation is a reefsafe polymer that melts at 61 degrees C and consists of small white granulate balls. By heating with water, the balls form a homogeneous transparent mass. As so...

DSR Speed Cement

DSR Speed Cement, can be processed in 60 seconds. DSR Speed Cement can be used for the quick bonding of stone coral or the bonding of stone ....

DSR Reef Cement

Reef Cement (clay), for making rock formations, process 1000gr in 5 minutes. This cement from DSR can be used for bonding stones & stone corals. For sticking stone tiles ...

Aqua Medic hot construct 100 g

Hot Construct from Aqua Medic is an easy-to-use plastic adhesive for quick and easy binding of coral fragments. It is free of solvents. Unused material can ...

Achilles Reef Epoxy 60 ml

Achilles Coralline Purple Reef Epoxy is a strong 2-component purple epoxy glue with easy processing and a drying time of 5 minutes ....

Frag grids

Grids for placing your coral frags / cuttings

Thrive Frag Systems

Thrive introduces an efficient way to store, edit and display corals. The Frag Tree 360. Designed to hold 27 frag plugs in a spiral-shaped staggered tree shape. Rhinestones in ...

AquaHolland Frag grid (white)

120 x 60 cm or 60 x 60 cm. White plastic - 13 mm thickness - Square holes of 13 mm. Easy to cut in any shape and size. Also suitable for other applications such as making a rai...

AquaHolland Frag grid 60 x 30 x 1.3 cm (Black)

AquaHolland Frag grid 60 x 30 x 1.3 cm. Color black Can be clicked together in width and length ....

Frag holder (incl. 12 perspex stones)

Sturdy perspex crystal clear cutting holder, including 12 perspex cutting stones. This cutting holder is mounted on the aquarium glass by means of magnets. These are suitable for a...

Aqua Medic frag board

Plug-in grid for holding different coral pins. Thanks to the supplied suction cups, the mounting plate can be placed freely on the inside of the aquarium. This allows ...

Achilles Coral Mag Rack

Achilles Coral Mag Rack is a cutting holder for approximately 30 cutting stones, equipped with strong N52 neodymium magnets suitable for a glass thickness of 13 mm. Perfect if you ...

Achilles Mag Rock

Achilles Mag Rock is a beautiful purple colored cutting rack with magnetic connection. You can attach the rack to the back wall or side walls of your aquarium in order to store cut...

Aqua Medic aqua grid

The aqua grid is a versatile plastic grid that can be used in many applications in the aquarium itself or in a drip tray / filter system. A unique very stable plug-in system in the...

Maxspect Fragnifier - magnifying glass + cutting holder

Thanks to the unique design everything is perfectly visible without having to zoom as with a standard magnifying glass. Only for glass aquariums up to 15 mm thick ...

Frag rocks

Frag rocks for attaching coral cuttings / frags

Ecotech frag rocks

Ecotech cutting stones have been developed to be able to be securely attached in a cutting grid through the fired chaste on the underside of the stone. Available in multiple co...

Achilles aragonite stones

Achilles aragonite cutting stones are available in a wide variety of shapes and sizes. All aragonite cutting stones from Achilles Aquatics are 100% made from Caribbean sand. Th...

AquaHolland frag rocks

AquaHolland cut stones are made from reef ceramics and have a very natural appearance after growth. These cutting stones are available with or without a pin.

Aquaforest Frag Rocks 24 st.

Beautiful frag rocks for making cuttings. The rocks resemble natural living rocks and, unlike ceramic rocks, are made of light materials and have a high porosit ...

Achilles Clam Holder

Achilles Clam Holder offers a preformed, hard substrate where font shells can attach. The stone is approximately 10 cm long and 6 cm wide and is made of ceramic ....

Aqua Medic coral pins

Many coral pieces can be propagated through simple fragmentation. The coral pins are very useful as spout stones for this. For the attachment of coral cuttings on the coral pins ad...

Cutting stones - 4.5 cm - for cutting corals - bag of 10 pcs...

Beautiful frag rocks from Aqua Holland for making cuttings. The rocks resemble natural living rocks and, unlike ceramic rocks, are made of light materials and have ...

Tools

Tools for aquascaping, cutting of corals, plants and algae in the aquarium

Achilles aquarium tools

The Achilles tools are made of first-class material and are ideal for use in freshwater and seawater aquariums. There are many different tools that consist of different types o...

AquaVitro® aquarium tools

The aquavitro® tools are made of first-class stainless steel and are ideal for use in freshwater and seawater aquariums. There are twelve different aquavitro® tools that cons...

Hobby aquarium tools

The hobby tools are made of first-class stainless steel and are ideal for use in freshwater and seawater aquariums. There are many different tools that consist of different typ...

Aquatic Nature aquarium tools

The Aquatic Nature aquarium tools are made of first-class stainless steel and are ideal for use in freshwater and marine aquariums. There are many different tools that consist ...

Ecotech cuttings kit (propagation kit) - packed in luxury wo...

Ecotech cuttings kit (propagation kit) - packed in luxury wooden box

Grotech ceramic knife

Razor-sharp ceramic knife for depositing soft corals, opening fish bags, packages, kitchen use, etc. Cutting on wood or plastic, not on metal ....

Plastic plant tongs 50 cm

Plastic plant tongs 50 cm Plastic plant tongs, 50 cm long. Also easy to pick up corals and / or stones in a deep container or hard to reach places. Can also be used for ...

Plastic plant tongs with scissors, 70 cm long

Plastic plant tongs with scissors from the brand Resun, 70 cm long. Also easy to pick up corals and / or stones in a deep container or hard to reach places. Can also be used ...

Aquaholland Corals cutter Precision made of stainless steel ...

Corals nippers Precision made of stainless steel for cutting cuttings or pruning your plants and corals. Intended for thin branches With these coral cutters, cutting is a lot of ea...

Aquaholland Corals cutter Heavy Duty made of stainless steel...

Corals cutter Heavy Duty, made of stainless steel for cutting cuttings or pruning your plants and corals Intended for thick branches. With these coral cutters, cutting is a lot ......

Aqua-Tongs - Super grab 82 cm long

Length: 84 cm Jaw width: 14 cm Good grip on heavy stones and objects. Ideal for large and deep aquariums. Length: 84 cm Jaw width: 14 cm ...

Coral grab made of aluminum, approx. 70 cm

Sturdy design tongs made of aluminum and plastic. Extremely suitable for picking up stones and fallen corals from your aquarium bottom ....

Aqua Medic coral cutter

These coral tongs are made of stainless steel for fragmenting strong stone corals. Rinse thoroughly in fresh water after you have been in contact with salt water ....

Overige Cuttings & supplies

Other products in the section Cuttings & supplies

Aqua Medic aqua gloves

The 75 cm long Aqua Medic Aqua gloves not only offer protection against wet sleeves, they also reduce the risk of possible contamination of the aquarium holder with fish tuberculos...

Tunze Long thin shoulder gloves

Tunze Long thin shoulder gloves 10 pieces per package ...

AquaHolland Reefspy

Available in different sizes. Reefspy is a floating plexi viewing glass. Ideal for taking photos of your corals ....

Nanoscope D-D Aquarium Solutions

The NanoScope aquarium magnifying glass viewer is one part microscope, on the one hand telescope and much more affordable than we had ever suspected. We were knocked out when we vi...

Grotech Reefspy

Grotech REEFSPY - plexiglass floating sight glass 150x50mm hg ....

Achilles Aquascaping Kit

Achilles Aquascaping Kit is a set for aquascapen with living stone. With this kit, creating an impressive and stable brick structure is simplified ....

Aqua Medic Coral holder

The Aqua Medic Coral holder is the solution for presenting invertebrates and clams in store systems. The holder has a flexible system, adaptable to the size ...