COR 15 Intelligent Pump

COR 15 - This submersible pump (which can also be used externally) now has its own external control cabinet, but you only need to connect it in one place - 1Link. With less than 50W of power, it pushes 1500gph and more importantly: at 6 'of the main pressure it still prints nearly 1000gph! This makes it the perfect pump for medium-sized aquariums. And you get the added benefit of Apex Fusion control and monitoring, with no energy mixes, no cable mess and no power outlet to use on your energy bar. In addition, the COR 15 uses the latest pump drive technology, making it so quiet that you do everything to make the device work. The COR 15 will work on any Apex that has a free 1 port, either via the 1-Link module or an Energy Bar 832.

• PHYSICAL DIMENSIONS: PUMP - 3,875 "W x 4,875" H x 6,250 "D
• CONNECTS TO EVERY APEX WITH A 1LINK PORT
• AVAILABLE UP TO 1500 GPH (5700 LPH)
• FOR INTERNAL OR EXTERNAL APPLICATIONS
• IQ-LEVEL SETS THE RIGHT MIN AND MAX FOR YOUR AQUARIUM
• INCLUDES OVERSIZED 1.25 inch UNION
• ENERGY EFFICIENT - USE LESS THAN 50 W OF POWER!
• INCREDIBLY calm!
• NO POWER BRUSH MEANS CLEANER INSTALLATION COMPATIBLE WITH
• ALL APEX SYSTEMS

Artery technology

The COR uses the latest Vector Control, BLDC engine technology. This drives the COR pump in a way that is both energy efficient and almost vibration and noise-free. Go ahead, challenge yourself to find a quieter pump!

OBSTRUCTION DETECTION

Snails, filter pads or other foreign objects often find their way to a pump. If the inlet to your COR or one of your pipes is considerably obstructed, the COR will warn you by making the LED on the driver blink. When the COR is connected to an Apex and internet, it also sends a warning to your mobile device.

INTERNAL TEMPERATURE MONITORING

The pump controller continuously monitors the internal temperature of the COR pump motor. If it reaches an unsafe level, the driver slows down the pump just enough to bring the temperature to an acceptable range and gives you a notification. Some pumps are completely switched off if they have a temperature problem, but the COR slows down so that your tank continues to circulate - giving you time to tackle the problem.

INTELLIGENT, QUIET, ENERGY EFFICIENT

Your return pump is by far the most important part of your aquarium. It circulates the water that is actually the lifeblood of a tank. Creating a large aquarium is just like building a great body - it all starts at the core - and this is exactly how our pump got its name!

The COR is a variable speed and brush-free centrifugal water pump, DC powered, specially designed for aquariums to be intelligent, energy efficient, incredibly quiet and incredibly powerful for its dimensions.

CONNECTS TO ANY APEX MODEL THROUGH AN AVAILABLE 1LINK GATE

The COR-15 uses a relatively new connection standard for the Apex, called 1LINK. The 1 LINK port offers a maximum of 50W of power and the control signal for connected devices. The advantage for devices such as the COR-15 is that no additional power supplies are required. These 1LINK ports are present on the recently released Energy Bar 832 and on a separate 1LINK module.

COMPATIBLE WITH EVERY APEX

All COR pump models are fully compatible with every Apex system on the market. Easily connect the COR-15 pump driver to an available 1 port on your Apex system - an Energy Bar 832 or a 1 Link module. It's that easy!

GREAT FLOW TO FLOW RATE

The COR-15 delivers a great flow and at the same time is super favorable on power, making it friendly to your wallet and the environment! Make sure you place the COR-15 in the right size to get the best performance. We recommend at least 1.25 inches

ADVANCED CONTROLLILITY

The COR was built from the ground up with the controllability of Apex in mind. Check the percentage of the pump output, get real-time operational feedback from the pump, integrate it into complex feeding routines and monitor the status of the pump anywhere in the world via Apex Fusion.

EASY INSTALLATION

Connect the plumbing, connect the COR to the driver and connect it to a 1 LINK port. With just a few pushes of a button you can set the pump flow rate and input modes. A startup task guides you step by step through the entire installation process.