Deltec protein skimmer 600i with controller
Suitable for aquariums with a capacity of: 200 to 600 liters. ...
Deltec protein skimmer 600i
The Deltec protein skimmer 600i is the replacement for SC 1351.
The Deltec Skimmer 600i has a newly developed emergency overflow. This prevents the "overcooking" of the skimmer when the water level in the skimmer rises. This can happen, for example, because the feed pump stops and the water level in the sump rises. In addition, there may be problems with the air supply, eg due to a kink in the silicone tube. Here the skimmer can "boil over" and the water rises so high that it is pressed into the foam pot and the foam waste is backwashed in the sump. This leads to an extreme load of water. This is prevented by emergency overflow.
Emergency overflow pipe and regulator tube
The water level in the Deltec Skimmer 600i can be read on the emergency overflow pipe. In addition, the minimum and maximum markings help to optimize the water level. Because of the possibility to change the emergency overflow pipe with the regulator tube, the user has the possibility to decide how the pipes have been installed.
The Deltec Skimmer 600i is equipped with the Deltec DCC 2 pump. This 24V DC pump can be operated via an eight-speed controller and can be optimally adjusted to the water level and the water load. At the optimum level 3 (for most aquariums), with only 11 watts, about 500 liters of air is generated.
The ergonomic cylinder shape
Thanks to the ergonomic cylinder shape, the Deltec Skimmer 600i achieves the best results with
skimming. The shape of the skimmer does not go up. This allows the small air bubbles to rise unimpeded, they are completely saturated and burst only in the riser of the foam pot. From there, the skimming waste can be discharged via a drain hose without having to lower the foam pot.
Hollow room bottom
An additional innovation of the Deltec Skimmer 600i is the hollow chamber base. This helps dampen the sound even further, making the already quiet Deltec Skimmer 600i whisper quiet. "Furthermore, the water flows back through the hollow chamber bottom and the water is brought out of the skimmer at the lowest possible point, leaving almost no air bubbles. can flow into the aquarium.
Disassembly, dimensions and construction
Normal cleaning of the pump is very easy thanks to the simple and quick disassembly of the skimmer. Deltec Skimmer 600i can be mounted and disassembled without tools. Tests have shown that the pump can be removed from the skimmer in less than 20 seconds. The dimensions of the Deltec Skimmer 600i are chosen so that they can be placed comfortably in a sump. Because of the large volume of the cylinder shape, a small base area is sufficient.
- Suitable for aquariums with a capacity of: 200 to 600 liters.
- Power consumption: 11 watts with an air output of 500 liters per hour.
- Sizes (LXWXH): 22 x 14 x 51 cm.
- Pump: Deltec DCC 2.
- Controller for adjustment to water level / load with eight positions.
- Recommended water level in the sump: 15 to 25 cm.
Features of the Deltec Skimmer 600i.
- Very efficient cylinder shape.
- Safe thanks to the newly developed emergency overflow with water level indicator.
- Whisper quiet through a new hollow bottom.
- Extremely low power consumption.
- Fast and easy removal of the pump.
- Variable adjustable pump.
Ocean Store is a modern webshop with a large selection of reef aquarium equipment, supplements and food for your (marine) aquarium. We excel in reachability, service and speed. Not only in delivery of your ordered goods, but also in the adequate answering of your (marine) aquarium related questions. We are happy to share our passion for reef aquariums with you!
Open: Available Monday / Friday 9:00-20:00
€ 0.99 - € 2999.99
Deltec 600i protein skimmer with controllerSuitable for aquariums with a capacity of: 200 to 600 liters. The Deltec Skimmer 600i has a newly developed emergency overflow. This prevents the skimmer from "boiling over" when the water l...€ 275.00 € 319.00