Red Dragon 3 Speedy pump - 19000L

Red Dragon 3 Speedy pump - 19000 ltr. - 230w - 8.85 mtr. boost...

Red Dragon 3 Speedy pump - 19000L

Red Dragon 3 Speedy pump - 19000 ltr. - 230w - 8.85 mtr. boost

HIGH PRESSURE VERSION with AKB anti-limescale bypass and 10V connection

Technical data Red Dragon® 3 Speedy pump 230 Watt 19.0 m³:

• 230 Watt/h 8.85 mtr. pressure height
• Speed Adjustable Brushless DC Pump
• Watt display on the controller /// adjustable in 2 Watt increments
• Inlet side 63 mm - pressure side 40 mm
• Operating voltage: 230 Volt 50 Hz (also available in 110V/60Hz)
• Pump and controller with removable Hirschmann plug connection
• Pump protection class: IP 68 control unit: IP 66
• Pump weight: 3.5 kg
• Weight regulator: 1.2 kg
• Height suction side: center 70 mm
• Pump size: ~ 130 mm wide / 295 mm length / 220 mm height
• Control unit size: ~190mm wide / 168mm length (250mm with connection cable) / 84mm height

Benefits Red Dragon® 3 Speedy pump 230 Watt 19.0 m³

• Saltwater Resistant M6 Class 2 Titanium Screws
• Saltwater Resistant Parabolic Rubber Feet for Acoustic Decoupling
• Extremely low-noise brushless DC pump with integrated power electronics
• Highly efficient technology "Made in Germany"
• Inlet and outlet complete with DIN connection, compact dimensions
• High-quality ceramic bearings and hollow shaft for bypass flushing in the rotor housing
• Saltwater only pump with titanium rotor, titanium stator and shriveled bearings
• Easy use and maintenance. Low risk of calcification due to polished titanium parts and mandatory venting
• Heavy and solid workmanship against vibration and vibration
• CE conformity, developed and built according to VDE guidelines
  
  

Extensive function integrated in the controller:

1. Food Timer
Selecting the menu item reduces the pump to minimum power or shuts down completely for a predefined period of 1-30 minutes.

2. Manual
This function allows manual selection of the pump power. The value can be set in steps of 2W (10W). Holding down the UP or DOWN key activates the highest or lowest possible value (230W/20W).

3. Interval
This function allows the pump power to be changed in time intervals.

4. Remote control 10V
This function activates the control via the 10V input.

5. Remote LAN
This function enables control via the future LAN adapter.

Change features:

6. Change food timer
By selecting this change function, the food timer time can be preset in the range of one minute to 30 minutes (UP/DOWN arrow keys).

7. Change Interval
By selecting this change function, you can enter the interval time.

8. Change clock settings
By selecting this change function, you can set the clock.

9. Change Language
By selecting this change function, you can set the menu language. (german/english).

The control/connection of the aquarium computer possible!
Prepared for connection to an aquarium computer (eg GHL) via a 0-10V interface.
No additional controller required.

Connection cable available here!

Tested so far according to these computers:
GHL ProfiLux 3.1 + 4, from Neptune Systems the Apex Aqua Controller and with SciTronix littleblue.