Milwaukee MW804 MAX Waterproof 4-in-1 pH / EC / TDS/Temp Tester with Replaceable Probe

The Milwaukee MW804 MAX Waterproof 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers. Range: pH: 0.00-14.00 pH | EC: 20.00 mS/cm TDS 0 – 10:00...

The Milwaukee MW804 MAX Waterproof 4-in-1 pH/EC/TDS/Temp Tester is designed as an all-in-one solution for growers.

Range : pH: 0.00-14.00 pH | EC: 20.00 mS/cm TDS 0 – 10.00 ppt | Temp: 0.0 to 50.0°C / 32.0 to 122.0°F
Accuracy : pH: ±0.05 pH | EC/TDS: 2% full scale
CALIBRATION : Automatic
Temperature compensation : Automatic

The Milwaukee MW804 MAX Waterproof 4-in-1 meter offers:

ACCURACY

The MW804 MAX 4-in-1 tester is accurate to ±0.05 pH, EC/TDS to 2% full scale and ±0.5°C / ±1°F for temperature.
With automatic calibration and 5 stored calibration points, the tester can be calibrated quickly and easily with higher accuracy compared to manual calibration.

LONGEVITY

The tester comes with a replaceable pH probe with a dual connection probe design for longer life.

FAST ANSWER

An exposed temperature probe is located close to the pH probe for rapid temperature compensation

WATERPROOF CONSTRUCTION

No more worrying about dropping your tester while measuring. The MW804 MAX is waterproof to IP65.

LIGHTWEIGHT

Weighing just 3.5 grams, the MW804 MAX is easy to handle at up to half the weight of other testers.

EASY TO USE

A large two-level LCD makes reading results easy, while a stability indicator and hold function that freezes the screen takes the guesswork out.

DESIGN FEATURES

• Quick and easy to read results with large digital dual LCD readout.
• Extreme accuracy to ±0.05 pH, EC / TDS 2% full scale and temperature ±0.5 C / ±1 F.
• Range 0.00 - 14.00 pH, EC 20.00 mS/cm, TDS 0 - 10.00 ppt, Temperature: 0.0 to 50.0 C / 32.0 to 122.0 F.
• Lightweight and portable at only 3.5 ounces.
• Simple measurement: just place the probe in the sample, stir gently, wait for the stability indicator to indicate a stable reading, then freeze the reading.
• Simple push button, automatic one or two point calibration with 5 stored calibration points.
• Gel filled dual junction pH electrode for low maintenance and high performance.
• Automatic shut-off and low power consumption for approx. 100 hours of continuous use (batteries included).

CARE AND USE

The MW804 MAX tester contains both a pH and an EC electrode. Both need maintenance.
All pH sensors have a limited life and the response time increases with age. Properly maintaining your pH Pen Tester will give you fast, accurate results for longer. So be sure to order the Milwaukee pH Maintenance Solutions MA9015 & MA9016 during checkout! This is necessary to clean and condition the pH electrode before use!

EC sensors are more robust, but can still be affected by residue buildup.

Here are our top four tips.

• 1. Always store with the cap full of buffer or storage solution MA9015, not water.
• 2. Regularly clean your tester by soaking it in cleaning solution MA9016.
• 3. After cleaning and/or storage, calibrate before testing to accommodate changes in the pH and EC sensor.
• 4. Gently stir the MAX tester into the sample for faster results.
• 5. Rinse with water after each test.

Thank you for considering Milwaukee to help you take your results to the next level.