Milwaukee 1382 ppm TDS calibration solution

M10032B is a laboratory grade 1382 ppm TDS solution standard prepared from a NIST traceable Potassium Chloride solution that allows you to recalibrate your conductivity meter or tester ...

Milwaukee 1382 ppm TDS calibration solution

Conductivity probe performance is affected by usage due to residue build-up and aging.

M10032B is a laboratory grade 1382 ppm TDS solution standard prepared from a NIST traceable potassium chloride solution that allows you to recalibrate your conductivity meter or tester. Consult your meter or tester's manual to find the correct calibration standard for your meter.

TDS measurements are affected by temperature. To assist with this, a table showing the actual ppm value at different temperatures is printed on each sachet.

Milwaukee TDS solutions are labeled with the lot number and expiration date and packaged in an airtight tamper-resistant sachet.

Design features

• Fundamental for accurate TDS measurement.
• Factory calibrated with Potassium Chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696 / BS3978.
• Sealed from light and air.
• Ideal for on-site calibration
• Simply open, insert the tester or electrode into the sachet and calibrate
• Each 20 ml sachet is marked with the lot number and expiry date.
• A temperature graph showing the actual ppm value at different temperatures is printed on each sachet.
• Expiration date of 5 years.