Not happy, Money back
+31(0)78-6456669 (Available Monday / Friday 9:00-20:00)

Ecotech Thin Spacer for Vortech MP 40.3

This is a replacement spacer for the Quiet Drive version of the MP40. EcoTech VorTech alignment and use of Dryside spacers. (MP10, MP40 and MP60) All VorTech pumps must *Please note ...

This is a replacement spacer for the Quiet Drive version of the MP40.

EcoTech VorTech Alignment and Use of Dryside Spacers. (MP10, MP40 and MP60) All VorTech pumps must

* Never run a submersible pump (such as the VorTech) outside of water as this may damage the pump.

  • 1. Measure your glass.
  • 2. Select the correct spacer (varies between MP10, MP40 and MP60 pump).
  • 3. Apply the spacer to the Dryside (engine)
  • 4. Choose the mounting location (tip: too high will suck in air, too low can move your sand bed - avoid obstructions in the tank, e.g. rockwork - the more open space around the pump, the more overall water movement you will achieve)
  • 5. Attach the pumps with the pump turned off and use the hanging tab. The hanging tabs are designed to protect the Dryside from falling and damage. If you are not mounting the tabs above the VorTech, make sure the tab is less than half the distance is between the engine and any surface the engine may come into contact with.
  • 6. Adjust the alignment until there is no noise or excessive vibration.
  • 7. Adjust/program your VorTech if necessary

Ecotech Thin Spacer for Vortech MP 40.3
Ecotech Thin Spacer for Vortech MP 40.3

Shipment

  • Above € 50,- free delivery in NL & BE
    In stock Ordered before 16:00, shipped today *

Images

Browse products
  • Ecotech Thin Spacer for Vortech MP 40.3

    In stock
    € 9.99