TUNZE - Water level alarm (7607/2)

Comes with three sensors, a dry-running sensor and two overflow sensors. Each sensor comes with a holder that can be attached with silicone or that can be clamped on horizon ...

TUNZE - Water level alarm (7607/2)

Switches pump off with over / dry running - 3 sensors

Comes with three sensors, a dry-running sensor and two overflow sensors. Each sensor comes with a holder that can be attached with silicone or that can be clamped on horizontal or vertical windows. The holding devices can also be combined. The control unit has an optical indicator for each sensor and an alarm sound emitter. The switched socket has a switching capacity for pumps up to 230 V / 1800 W (at 115 V / 900 W).

The water level alarm is used as a supplement to water make-up units. In the event of a fault, the switched socket switches off all connected devices; in addition, a warning signal sounds and a red LED lights up. Note: the water level alarm is not a remedy for defects in installation or maintenance.

English description of Tunze

Comes with three sensors, a run-dry sensor and two overflow sensors. Each sensor comes with a holding device which can be attached with silicone or can be clamped to horizontal or vertical panes. The holding devices can also be combined. The control unit has an optical indicator for each sensor and an alert sound emitter. The switched socket outlet has a switching capacity for pumps or up to 230 V / 1,800 W (at 115 V / 900 W).

The water level alarm is used as a supplement to water refill units. In the event of a failure, the switched socket outlet switches off all connected appliances; in addition to a warning signal, sounded and a red LED lights up. Please note: The water level alarm is not a remedy for defects in installation or maintenance.

Function of the sensors

A = Second "too high" overflow sensor in the filter tank provides a protective function in the water refill case is not switched off.

B = Run-dry protection sensor, which protects the filter system if the water refill system fails and the normal water level C is "too low".

C = Normal water level in the filter tank.

D = "too high" overflow sensor in the aquarium protects, for example, against a clogged drain.

E = Normal water level in the aquarium