Tunze controllers
An unbeatable team - Turbelle® pumps with electronic motor and TUNZE® controllers. They can reproduce real reef currents in your tank. TUNZE® controllers concentrate on the foundations. There are also a few controllers to also control your light and temperature in the aquarium.
Tunze duocontroller
Tunze duo controller for 7200 / 2-7300 / 2-6055-6105-6255-6155, among others. The Tunze Wave Controller is equipped with a 'membrane' control panel. This c...
Tunze Photocell 7094 for single and multi-controller
Tunze Photocell for single and multicontroller for night-active pumps ...
Tunze Moonlight Turbelle 7097.050
By means of a photocell, it simulates a 29-day lunar phase and causes a speed drop so that the flow during the night is reduced when pumping with a Turbelle® controllerad ...
Tunze adapter 7094.400
Tunze adapter 7094.400 for connecting 2002/4002 to single or multicontroller ....
Tunze Smartcontroller 7000
Within a single device, the new TUNZE® SmartController 7000 combines all the important functions needed to create natural conditions in the aquarium. Required so far ...
TUNZE - Waterstandalarm (7607/2)
Comes with three sensors, a dry-running sensor and two overflow sensors. Each sensor comes with a holder that can be attached with silicone or that can be clamped on horizon ...
Tunze pH-CO2 Smartcontroller 7070
The Tunze pH / CO2 SmartController 7070.000 is a complete set consisting of the SmartController 7000 and the following accessories: 7070.200 CO2 valve set, including non-return val...
Tunze CO2 Valve set
Including non-return valve 7070.010 and a hose 7072.300 of 5 m (196.8 in). Note: A suitable Tunze controller is needed to control this Tunze CO2 Valve ...
Tunze Controlled Power Socket
To switch heaters, cooling units or ozone generators with SmartController 7000, max. 1,800 W, 230 V (900 W / 115 V) ohmic load, including connection cable for another pump / LED on...
Tunze Photo-electric cell for 7095
Replacement photoelectric cell + Moonlight with connector for the multi-controllers 7095 and 7096...
Tunze pH electrode 7070.110
Made of glass, BNC connection, cable length 2 m (78.7 in.), suitable for unit 7070.000 or for commercially available measuring instruments with a BNC connection....
Tunze 3 knobs for controller (7090.102)
Replacement Tunze knobs for controller. 3 pieces per pack (7090.102)...
Tunze Safety Connector
Enables normal operation using the TUNZE® power supply and automatically switches to a battery or DC power supply in the event of a power failure....
Tunze Cleaning solution
Cleaning product for pH, mV and conductivity electrodes....
Tunze Redox Test Solution +475 mV, 50 ml (1.7 oz.)
Redox potential test solution for the verification of redox electrodes with the following measured values:...
Tunze Buffer solution for pH 7 and 9 (7040.120)
Tunze Buffer solution for pH 7 and 9 (7040.120) for all pH measuring instruments....
Tunze mV Electrode
Made of glass, BNC connection, cable length 2 m (78.7 in.), suitable to replace Redox Controller 7075,000, 7000,000 or commercially available mV measuring instruments with BNC conn...
Tunze SmartController 7000.001
The SmartController 7000.001 is designed for precise pH or redox measurements and uncomplicated wireless updates. Including temperature probe. Including wall bracket. Integrated re...
