Giesemann VERVVE G-3 Marine - 170 Watt

With a power consumption of up to 170 watts, state-of-the-art high-power LEDs and even, homogeneous lighting, it is one of the most effective lamps in the aquarium industry. Using a diffuser in ...

Giesemann VERVVE G-3 Marine - 170 Watt

The perfect reef light

With a power consumption of up to 170 watts, state-of-the-art high-power LEDs and even, homogeneous lighting, it is one of the most effective lamps in the aquarium industry.

The use of a diffuser in combination with optimal PAR & PUR values makes the VervVe G3 the perfect reef lighting. The design speaks for itself and the finish is of the highest level.

The new generation

• Maximum 170 Watts
• 1,210 PAR
• Diffuser for optimal lighting
• Powder-coated aluminum housing
• Arctic white or iridium grey
• Integrated Wi-Fi Control
• Lights combinable
• Passive & Active Cooling / Extremely Quiet
• Handmade in Germany
• Can be repaired even after many years

No spot effect and homogeneous lighting

By dispensing with highly concentrated lenses and using a diffuser disc, perfect illumination is achieved for surfaces of 80 x 70 cm and depths up to 80 cm. The entire light of the VERVvE G3 is directed into the aquarium without loss and comparable to a T5.

Worth knowing about the VervVe G3 LED aquarium lighting

PAR values

PAR measurement is used to measure the photosynthetically active radiation of plants in the visible light range (380 > 780 nm). The final effective PAR value over your aquarium depends on many factors. These include not only the movement of water, but also the density of the water.

PUR values

The photosynthetic radiation (PUR) relevant for optimal Zoox photosynthesis is between 360 and 480 nm and starts outside the range of visible light (measured with PAR meters) in the UV range and continues into the blue range of visible light. light.

The PUR value is calculated by isolating the PUR wavelength intensity data for each individual wavelength from the so-called radiospectrometer analysis.

PUR across the blue spectrum of the new VervVe G3 corresponds to 100% PUR and, simply explained, is slightly higher than the PAR value we measured due to the undetectable UV wavelengths. Because we work with different channels in the white range, ranging from 3,500 > 8,500 K, an average PUR value of 65% of the PAR values of these channels has been calculated.

PPFD

In addition to the irradiance of a light source, the photon flux density (PPFD) must also be taken into account. - abbreviated PPFD. Only the usable photons are taken into account and not the total energy.

The photon flux density counts the number of photons that hit a square meter per second. The number is then expressed in micromol per square meter and second (μmol/m2s).

Not only are we limited to blue and one white channel, but the LED configuration of the new VervVe G3 LED aquarium lamp includes 6 channels. This configuration offers the highest performance and guarantees the perfect lighting for marine aquariums.

LED fixture

• VervVe G3
• LED clusters 2
• Number of LEDs 56
• Power LED total 170 W
• Spectrum LED total 3,500 - 25,000 K
• Average LED life 22,000 hours (L70/B10)
• UV | 400nm 2
• UV | 410nm 4
• purple | 420nm 4
• royal bue | 440-450nm 14
• Blue | 455-465nm 8
• Blue | 465-480nm 4
• Cyan | 490-500nm 4
• White | 3,500K 2
• White | 6.500K 12
• White | 8,500K 2

Control

We have also used the latest technology for the controls and every Vervve G3 can now be controlled with our lynk Control App.

Thanks to the new smart Giesemann lynk - Lightcontrol Wi-Fi App, the VervVe G3 can be controlled directly without other peripherals. Use our thoughtful presets in Easy Mode or the extended Professional Mode.

Share your favorite light profile with other users via Whatsapp or email. The Lynk app is available to download for free from the Apple Store and Google Playstore.