Hobby Vario suction basket
Suction piece for all normal filters. To protect small and young fish. Adjustable opening by turning ....
Hobby Vario suction basket
Suction piece for all normal filters. To protect small and young fish. Opening adjustable by turning.
Use the Hobby Vario Suction Basket to prevent unwanted waste or any small aquarium fish from entering the filter. This screen is specially designed and can be connected to all filters. Place the strainer on the filter suction piece and adjust the size of the suction basket opening.
The Hobby Vario Sieve not only ensures that unwanted plant residues or other junk do not end up in the filter, but also does not allow smaller or young aquarium fish to pass through. This allows you, for example, to make a filter that was previously not suitable for small aquarium fish suitable for an aquarium in which smaller aquarium fish swim. The opening of the suction basket can be adjusted yourself and therefore you can also control the water supply.
Advantages of the Hobby Vario suction basket
- Avoid unwanted waste in the filter
- Small and young aquarium fish are not sucked up by the suction basket
- Specially designed suction piece that can be connected to all filters
- The size of the opening of the suction basket can be adjusted yourself
- Durable material, lasts longer
The Vario suction basket is suitable for our 12 mm tube (64200) and for our 12/16 mm hose (eg: 65102).
Brand
Shipment
-
Above € 50,- free delivery in NL & BEIn stock Ordered before 16:00, shipped today *
Ocean Store
Ocean Store is a modern webshop with a large selection of reef aquarium equipment, supplements and food for your (marine) aquarium. We excel in reachability, service and speed. Not only in delivery of your ordered goods, but also in the adequate answering of your (marine) aquarium related questions. We are happy to share our passion for reef aquariums with you!
Open: Available Monday / Friday 9:00-20:00
Phone: +31(0)78-6456669
€ 0.99 - € 2999.99
EUR
479190
-
Hobby Vario suction basket
Suction piece for all normal filters. To protect small and young fish. Opening adjustable by turning. (4011444118004)€ 2.99
Glasboren
68992 Glass drill bit for drilling a hole in your aquarium glass. In general this is used for making a so-called transit.
Metal T-piece 4/6 to 9/12
HO-63400 Small metal T-piece for making taps from, for example, a main pipe to small taps ....
Metal T-piece 4/6 to 12/16
HO-63500 Small metal T-piece for making taps from, for example, a main pipe to small taps ....
Plastic hose clamp
SLK-1215 Plastic hose clamp available in almost every diameter. Suitable for securely attaching a plastic or silicone hose to the fixed pipe or hose pillar of the pump.
Hobby reduce, 4/6 to 2/3, coupling piece 4/6
HO-62400 Coupling piece can be used for a transition from 4/6 mm hose to 2/3 mm hose. Connectors can also be used to connect 4/6 mm hose to 4/6 mm hose. The small reducing spout that ...
Plastic bend for hose
91225 Hard plastic bend for hose to make a sharp bend without the hose kinking.
Micro valve for hose 4/6 mm
DIV-00006 Very robust micro-valve for hose 4/6 mm. For connecting a 4/6 mm hose and making the liquid / air throughput adjustable ....
Hobby knees 4/6
HO-62800 Transparent plastic knee piece for 4/6 mm air hose / silicone hose ....
Tunze Overflow Box - overflow
TU-1074/2 Tunze Overflow Box - overflow (instead of transit with hole). This is an additional installation for the aquarium. With this overflow box you can keep the water level constant. With surface, - and bottom aa ...
T-piece for plastic hose 4 / 6mm
OS-104006 T-piece for plastic hose 4/6 mm with compression fittings. Perfect coupling piece for 4/6 mm plastic or silicone hose ....
Hobby Plastic hose clamp
HO-63800 Plastic clamp of the brand Hobby to clamp a hose on or on the edge of the glass. Can also be used for pinching a hose. Consider, for example, the air supply hose of e ...
Hobby Air tap
HO-63611 Air tap for between 4/6 mm hose. For controlling / pinching the air flow ....
Check valve (4/6 mm)
LU-2000 Check valve for protection against backflow of liquid. For dosing pumps and air pumps. In the event of a power failure, this prevents water from flowing back into the pump, for example.
Hobby metal tee 4/6
HO-63310 Hobby metal T-piece for splitting 4/6 mm hose in two directions ....
Hobby Y Piece
HO-62750 Hobby Y Piece for splitting 4/6 mm hose in two directions.
Aqua Medic aqua divider 4 pcs.
418.10 With the Aqua Medic aqua divider it is possible to mount a glass plate in an aquarium or terrarium without using glue. The groove holds a 4 mm glass plate. The confirmation ...
Finishing trowel for silicone
ASS4 Very extensive set of finishing spatulas for silicone. This allows you to finish your kit edges very tightly in the right profile form ....
U turn
UJ-08 U-turn at right angles available in 8, 12 and 16 mm. Handy for, for example, a hose over the edge of the bucket / sump or to make a short turn back.
Aqua Medic Reducing tees
410.40 Reducing T-pieces are used for the connection of bypass filters such as the Nitrate reducer and the Calcium reactor ....
Aqua Medic Outlet strainers
418.20 These PVC filter basket tubes with saw cuts are generally used for creating a well-adjustable standpipe in the overflow of an aquarium. The pipe has slots ...
Aqua Medic pipe holder
71615 Holder for 6 mm CO2 hose for mounting on glass with a thickness up to 10 mm ....
DvH Maggie Muffler Overflow
Magg This simple piece of technology ensures that splashing overflows in seawater aquariums are a thing of the past. All you have to do is place the Maggie Muffler on the overflow pipe. The R...
Plastic tap 2 x
223-103159 Plastic faucet 2 x -for air hose 4 / 6mm
Aqua Medic Regulation valve 4/6 mm 2 pc.
410.47 Control valve for pipe diameter 4/6 mm. The control valve can be used for both air and water (Nitrate Reducer and Calcium Reactor). High-quality plastic ensures a long service life. The current...
Aqua Medic valve (tap)
411.411.40 The control valve can be used for both air and water. High-quality plastic ensures a long service life. (2 pieces per package) ...
Eheim suction cup with clamp bracket 16/22 mm
eh-4015150 Eheim part 4015150, suction cup with clamp for 16/22 mm hose. 2 pieces per package For hose size: 16/22 mm ....
Aqua Medic Round grid
415.31 These Aqua Medic Round grates are ideal to prevent larger waste from flowing through. Ø 40 mm, 50 mm and 63 mm (approx. 1.6 ", 2" and 2.5 ") Available in black or transparent version.
PVC filter basket tube with saw cuts incl
PV-6820 These PVC filter basket tubes with saw cuts are generally used for creating a well-adjustable standpipe in the overflow of an aquarium. The pipe has slots ...
PVC filterkorf
PV-6220 PVC material suitable for all kinds of purposes etc. which has to do with water and / or air.
Piping & supplies
Under Piping & Supplies you will find PVC piping, hoses, couplings & taps and the like that you need for laying your water and air pipes. Here you will also find clamps, glue, glass drills and many more items for the construction and connection of your (marine) aquarium piping.
Hobby plastic piping
Hobby plastic piping is suitable for installing piping from the aquarium to the filter, but also for making a dosing container with, for example, a bottle and the Hobby 5 mm plastic tube.
Hobby Carbon super active, 500 g
HO-20610
Coral Box Liquid fluid box 3 x 1,5L
Liquidbox
Aqua Medic pH-control-Set
200.50
AquaHolland CO2 set
CO-103207
