Gryphon AquaSaw C-40CR Band Saw with 37" Ribbon

Gryphon AquaSaw C-40CR band saw with 37″ blade allows cutting most small and medium corals....

Gryphon AquaSaw C-40CR Band Saw with 37" Ribbon

Gryphon AquaSaw C-40CR band saw with 37″ blade allows cutting most small and medium sized corals.

This corrosion resistant AquaSaw is designed for use with salt water and is generally used to cut corals. It is based on the regular C-40, but has improvements designed to reduce maintenance when the saw is used in a corrosive environment, such as with salt water. However, regular cleaning with fresh water is recommended.

A vertical distance of 8.9cm (3.5″), with the top blade guide removed, allows cutting of most small and medium-sized corals

Characteristics

• Simple construction with few moving parts
• Motor has sealed bearings for improved corrosion resistance
• New high-speed motor for the fastest cut available
• Direct drive – no belts or pulleys
• Powerful motor on top, away from the water
• A guard is fitted to the underside of the motor to prevent salt water splashes
• Huge water tank under the work surface
• 30.5 cm2 unobstructed work surface
• Under table top guide and new top guide above table
• Metal parts are stainless steel or hard anodized aluminum

Comes with stainless steel band saw, but the saw can use any Gryphon band saw

Specifications

• Model: AquaSaw
• Vertical Clearance: 8.9cm (3.5") without top guide
• Motor: 1/3 hp Direct Drive DC
• Blade Speed: 64 km/h (40 miles per hour)
• Platform surface: 30.5 cm2
• Refrigerant system: recirculating tap or salt water
• Coolant Reservoir: 25 x 22.7cm (10" x 9")
• Voltage Adjustment: Single Button
• Blade Dimensions: 93.6cm (37") circumference, 0.05cm (0.02") wide, 0.35cm (0.14") deep