Aquatrinica Connection cable MM (ACQ402)
Connection cable compatible with all control systems, power supplies, interfaces and modules....
Aquatrinica Connection cable male - male (ACQ402)
Connection cable compatible with all operating systems, power supplies, interfaces and modules.
Shipment
-
Above € 50,- free delivery in NL & BEIn stock Ordered before 16:00, shipped today *
-
Aquatrinica Connection cable M-M (ACQ402)
In stock€ 5.50
Aquatronica Touch Deluxe Kit ACQ140KIT-DL
ACQ140KIT-DL A case with everything you need for your aquarium....
Aquatronica Power Bar 6 plugs ACQ012
ACQ012 Powerbar with 6 sockets I/O (Schuko standard). For controlling 230V devices in on/off mode. Suitable for connecting pumps, filters, lamps, skimmers, etc....
Aquatronica Power Bar 8 plugs ACQ013
ACQ013 For controlling 230V devices in on/off mode. Suitable for connecting pumps, filters, lamps, skimmers, etc....
Aquatronica Density Interface ACQ210N-D
ACQ210N-D High range conductivity interface for measuring and checking the conductivity value in marine aquariums (Density), by connecting an Aquatronica EC electrode (High range Conductivity elec...
Aquatronica Conductivity Interface ACQ210N-MS
acq210n-ms Low Range Conductivity Interface for measuring and checking the conductivity value in freshwater aquariums, by connecting an Aquatronica Low Range conductivity electrode....
Aquatronica pH 7 Ijkvloeistof (75ml)
ACQ-410-PH7 The ph7 calibration fluid is used to calibrate the PH electrodes Contents: 75ml PH7 Buffer solution ...
Aquatronica pH 4 Ijkvloeistof (50ml)
ACQ-410-PH4 The ph4 calibration fluid is used to calibrate the PH electrodes Contents: 50ml PH4 Buffer solution ...
Aquatronica pH 10 Ijkvloeistof (75ml)
ACQ410-PH10 The ph10 calibration fluid is used to calibrate the PH electrodes Contents: 50ml PH10 Buffer solution ...
Aquatronica Calibration fluid 1.4 mS (fresh water conductivity) (50 ml)
ACQ-410-MS For calibrating (calibrating) your conductivity electrode, so that you are always assured of the correct measurement values ....
Aquatronica Calibration fluid 53mS - bottle (density seawater) (50ml)
ACQ-410-DS Very accurate and stable calibration fluid for salinity probes at a value of exactly 53mS ....
Aquatronica IJkvloeistof redox 220mV- fles (ORP - redox) (50ml)
ACQ-410-RX The IJkopload 240 mV makes it possible to calibrate the Redox electrode (ORP) correctly ....
Aquatronica Cleaning fluid for electrodes - bottle (50ml)
ACQ-410-CLN For cleaning your electrodes, so that you are always assured of the correct measurement values ....
Storage liquid pH / ORP electrodes - bottle a 60ml.
N-100615 To optimally protect the electrode of your pH meter, we recommend that you keep it moist with this storage solution with special formula KCI solution. Ensure an optimal meeting and lifespan ...
Aquatronica PH Interface ACQ210N-PH
ACQ210N-PH ACQ210N-PH Interface for measuring and controlling the pH in the aquarium, simply through an Aquatronica pH electrode....
Aquatronica Redox (ORP) interface (ACQ210N-RX)
ACQ210N-RX Redox Interface for measuring and monitoring the ORP (Oxide-Reduction Potential) value in the aquarium, by connecting an Aquatronica ORP electrode....
Aquatronica Temperature & Level Interface (ACQ210N-TL)
ACQ210N-TL The Temperature & Level Interface allows the user to connect additional Aquatronica temperature and level sensors....
Aquatronica Water Leakage Interface ACQ210N-WL()
ACQ210N-WL The water leakage interface is used to connect one or two water leakage sensors to the system. By using this interface, in combination with the relevant water leakage sensor (code AC...
Aquatronica Dissolved Oxygen Interface (ACQ210N-O2)
ACQ210N-O2 Dissolved oxygen interface is used for measuring and controlling the value of dissolved oxygen in saltwater or freshwater aquariums (O2), by connecting the relevant sensor (ACQ310N-O2)...
Aquatronica Flow Meter Interface (ACQ210N-FW)
ACQ210N-FW The flow interface connects the flowmeter sensor to the system area of the Aquatronica Power Bar to continuously measure and monitor the flow from your pump, filter, etc.......
Aquatronica Actove Hub (ACQ215)
ACQ215 ACQ215 Active Hub can be connected to the control systems together with the other Aquatronica accessories, when each connection on the power unit is already used by other components....
Aquatronica USB PC Interface (ACQ222)
ACQ222 This kit allows the Aquarium Controller system to be connected to a PC to download data, program settings and perform software updates. With this kit, the Aquari...
Aquatronica Electrode holder
ACQ-420 With the electrode holder, all types of (Aquatronica) electrodes can be hung in the aquarium or external filter. In contrast to suction cups, this also provides a reliable ...
Aquatronica Tunze Pump Cable (ACQ428)
ACQ428 Cable for 12V Tunze® moving pumps. This kit has No. 2 cables that allow to connect the turbelle electronic pumps to the module "Tunze® Pumps Module" (AC...
Aquatronica Dosing Pump Accessories Kit (ACQ425)
ACQ425 With the ACQ425 accessories kit, your Dosing Pumps (ACQ450) can be easily connected to containers with aquarium supplements....
Aquatronica Connection Cable Male - Female (ACQ403)
ACQ403 Connection cable compatible with all control systems, power supplies, interfaces and modules....
Aquatronica SMS Module (ACQ240)
ACQ240 The SMS module is used to send messages to/from mobile phones, via a remote connection, and to receive information about the condition of your aquarium....
Aquatronica 0-10V Open Dimming Light Module (ACQ445)
ACQ445 Homemade dimmable lighting devices, or those from other brands, can be connected to the Aquatronica system thanks to the Open Light Dimming Module. This means that the connected device...
Aquatronica Dosing Pump (ACQ450)
ACQ450 Aquatronica dosing pumps guarantee the possibility of dosing liquids in your aquarium....
Aquatronica Tunze® Module (ACQ460)
ACQ460 With the Tunze® Pumps Module, Tunze® electronic motion pumps can be controlled by the Aquarium Controller System. The module allows the user to control the Controller and/or a PC (via a...
Aquatronica Temperature Probe (ACQ001S)
ACQ001S The temperature sensor is used to measure the temperature of the water in continuous immersion....
Aquatronica Level Sensor (ACQ300)
ACQ300 The level sensor is used to monitor the water level in the aquarium or in an external filter (sump) and offers, for example, the possibility of automatically refilling the water thanks to the...
Aquatronica High Conductivity Electrode (ACQ310N-D)
ACQ310N-D The highly conductive electrode is used to measure the conductivity value (density) under continuous immersion in saltwater aquariums. ...
Aquatronica Low Conductivity Electrode (ACQ310N-MS)
ACQ310N-MS The low conductivity electrode is used to measure the soft conductivity value under continuous submersion in soft water aquariums. It must be connected to the power supply through the special interface...
Aquatronica PH Electrode (ACQ310N-PH)
ACQ310N-PH The pH electrode is for measuring the pH value on an aquarium in continuous immersion. It must be connected to power supplies through the appropriate interface. Thanks to the flexibility of the...
Aquatronica Redox Electrode (ACQ310N-RX)
ACQ310N-RX The Redox electrode (ORP) is for measuring the ORP value in the aquarium under continuous immersion. It must be connected to the power supply through the special interface. Thanks to the flexible...
Aquatronica Dissolved Oxygen Probe (ACQ310N-O2)
ACQ310N-O2 Dissolved oxygen probe is used to measure and control the value of dissolved oxygen in saltwater or freshwater aquariums (O2); our probe works in continuous immersion....
Aquatronica Flow meter sensors
ACQ310N-DN10 For the Aquatronica management system. Flowmeter sensor ø 10 max 2400 l/h...
Aquatronica Water Leak Sensor (ACQ320)
ACQ320 The water leakage sensor is used to detect possible leakages of water on flat surfaces where the aquarium is placed: in this way, based on how it is programmed,...
Aquatronica Light Sensor (ACQ325)
ACQ325 This digital sensor allows Aquatronica systems to measure the light condition of the aquarium....
